100% private · runs in your browser

Morse Code for Be safe

BE SAFE is two words. BE is B then E (B is the long one); SAFE starts with S and ends with E, with A and F in between. Encoded: −··· · / ··· ·− ··−· · · about 3.6 seconds at 18 WPM.

−··· · / ··· ·− ··−· ·

Text
Morse code
-... . / ... .- ..-. .
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
7 chars2 words12 · / 3

Letter-by-letter Morse for Be safe

“Be safe” breaks into 2 words. Each letter below has its own Morse; slashes mark the word gaps.

−··· · / ··· ·− ··−· ·

About “Be safe” in Morse

Encoded it is −··· · / ··· ·− ··−· · — 2 words, 7 characters (B, E, S, A, F), 12 dits and 3 dahs, about 3.6 seconds at 18 WPM.

Keep the 1 word gap (shown as /) or “Be safe” collapses into one letter soup.

Open the full Morse translator
Morse
−··· · / ··· ·− ··−· ·
Dots / dashes
12 · / 3 −
Characters
7
At 18 WPM
3.6 seconds
Longest character
B (−···)

How to tap “Be safe”

  1. The pattern is −··· · / ··· ·− ··−· ·. A dit is a short tap or flash; a dah is about three times longer.
  2. “Be safe” is 2 words (B, E, S, A, F). Gap letters by about three dits, and put a longer slash-sized gap between words.
  3. At 18 WPM this takes about 3.6 seconds. Give B (−···) its full length — it is the slowest character here.
  4. Press Play to hear Be safe, or turn on the lamp and match the flashes.

Easy to mix up

In “Be safe”, watch B (−···) vs D (−··); S (···) vs H (····); A (·−) vs N (−·); F (··−·) vs L (·−··).

Morse Code for Be safe — FAQ

What is the Morse code for Be safe?

The Morse code for “Be safe” is −··· · / ··· ·− ··−· ·. That uses B, E, S, A, F.

How do you tap or flash Be safe in Morse?

Match −··· · / ··· ·− ··−· ·: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.

How long does Be safe take to send?

At 18 WPM, “Be safe” takes about 3.6 seconds. At 12 WPM the same −··· · / ··· ·− ··−· · pattern is slower but the dit/dah ratios stay identical.

Which letter in Be safe is hardest in Morse?

B is the longest character in “Be safe”: −··· (dahditditdit).