100% private · runs in your browser

Morse Code for Dad

DAD is a palindrome of two D’s around A. D is dah-dit-dit; do not lengthen it into B. Encoded: −·· ·− −·· · about 1.7 seconds at 18 WPM.

−·· ·− −··

Text
Morse code
-.. .- -..
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
3 chars1 words5 · / 3

Letter-by-letter Morse for Dad

Every letter in “Dad” is shown below with its Morse. There is no word slash because this is a single word.

−·· ·− −··

About “Dad” in Morse

Encoded it is −·· ·− −·· — 1 word, 3 characters (D, A), 5 dits and 3 dahs, about 1.7 seconds at 18 WPM.

The slowest letter is D (−··, dahditdit). Give it full dah length.

Open the full Morse translator
Morse
−·· ·− −··
Dots / dashes
5 · / 3 −
Characters
3
At 18 WPM
1.7 seconds
Longest character
D (−··)

How to tap “Dad”

  1. The pattern is −·· ·− −·· (dahditdit, ditdah, dahditdit). A dit is a short tap or flash; a dah is about three times longer.
  2. “Dad” is one word of 3 letters (D, A). Gap letters by about three dits; there is no word slash.
  3. At 18 WPM this takes about 1.7 seconds. Give D (−··) its full length — it is the slowest character here.
  4. Press Play to hear Dad, or turn on the lamp and match the flashes.

Easy to mix up

In “Dad”, watch D (−··) vs B (−···); A (·−) vs N (−·).

Morse Code for Dad — FAQ

What is the Morse code for Dad?

The Morse code for “Dad” is −·· ·− −··. That uses D, A.

How do you tap or flash Dad in Morse?

Match −·· ·− −··: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.

How long does Dad take to send?

At 18 WPM, “Dad” takes about 1.7 seconds. At 12 WPM the same −·· ·− −·· pattern is slower but the dit/dah ratios stay identical.

Which letter in Dad is hardest in Morse?

D is the longest character in “Dad”: −·· (dahditdit).