100% private · runs in your browser
Morse Code for 2
The digit 2 is ··−−−. 2 is two dits and three dahs. Each step from 1 to 5 adds a dit and drops a dah.
··−−−
Text
Morse code
..---
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
1 chars1 words2 · / 3 −
Letter-by-letter Morse for 2
Digits use five Morse elements. 2 is ··−−− (ditditdahdahdah).
··−−−
About Morse for the digit 2
2 sits next to 1 (·−−−−) and 3 (···−−).
Sending 2 at 18 WPM takes about 1.1 seconds (ditditdahdahdah).
- Morse
- ··−−−
- Dots / dashes
- 2 · / 3 −
- Characters
- 1
- At 18 WPM
- 1.1 seconds
How to tap 2
- The pattern is ··−−− (ditditdahdahdah). A dit is a short tap or flash; a dah is about three times longer.
- 2 is a single character, so you only need the tiny gap between its own dits and dahs.
- At 18 WPM this takes about 1.1 seconds. Slow down to 12 WPM if you are still learning the rhythm.
- Press Play to hear 2, or turn on the lamp and match the flashes.
Morse Code for 2 — FAQ
What is the Morse code for 2?
The Morse code for “2” is ··−−−. That uses 2.
How do you tap or flash 2 in Morse?
Match ··−−−: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.
How long does 2 take to send?
At 18 WPM, “2” takes about 1.1 seconds. At 12 WPM the same ··−−− pattern is slower but the dit/dah ratios stay identical.
Related Morse lookups
Other high-intent translations — each page has its own Morse, timing, and breakdown.