100% private · runs in your browser
Morse Code for 4
The digit 4 is ····−. 4 is four dits and a dah. Drop the dah and you are left with H.
····−
Text
Morse code
....-
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
1 chars1 words4 · / 1 −
Letter-by-letter Morse for 4
Digits use five Morse elements. 4 is ····− (ditditditditdah).
····−
About Morse for the digit 4
4 sits next to 3 (···−−) and 5 (·····).
Sending 4 at 18 WPM takes about 800 ms (ditditditditdah).
- Morse
- ····−
- Dots / dashes
- 4 · / 1 −
- Characters
- 1
- At 18 WPM
- 800 ms
How to tap 4
- The pattern is ····− (ditditditditdah). A dit is a short tap or flash; a dah is about three times longer.
- 4 is a single character, so you only need the tiny gap between its own dits and dahs.
- At 18 WPM this takes about 800 ms. Slow down to 12 WPM if you are still learning the rhythm.
- Press Play to hear 4, or turn on the lamp and match the flashes.
Easy to mix up
4 is easy to mix with V (···−). Learn both rhythms so they stay distinct.
Morse Code for 4 — FAQ
What is the Morse code for 4?
The Morse code for “4” is ····−. That uses 4.
How do you tap or flash 4 in Morse?
Match ····−: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.
How long does 4 take to send?
At 18 WPM, “4” takes about 800 ms. At 12 WPM the same ····− pattern is slower but the dit/dah ratios stay identical.
Related Morse lookups
Other high-intent translations — each page has its own Morse, timing, and breakdown.