100% private · runs in your browser
Morse Code for 6
The digit 6 is −····. 6 is a dah and four dits. B is the same start with one fewer dit.
−····
Text
Morse code
-....
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
1 chars1 words4 · / 1 −
Letter-by-letter Morse for 6
Digits use five Morse elements. 6 is −···· (dahditditditdit).
−····
About Morse for the digit 6
6 sits next to 5 (·····) and 7 (−−···).
Sending 6 at 18 WPM takes about 800 ms (dahditditditdit).
- Morse
- −····
- Dots / dashes
- 4 · / 1 −
- Characters
- 1
- At 18 WPM
- 800 ms
How to tap 6
- The pattern is −···· (dahditditditdit). A dit is a short tap or flash; a dah is about three times longer.
- 6 is a single character, so you only need the tiny gap between its own dits and dahs.
- At 18 WPM this takes about 800 ms. Slow down to 12 WPM if you are still learning the rhythm.
- Press Play to hear 6, or turn on the lamp and match the flashes.
Easy to mix up
6 is easy to mix with B (−···). Learn both rhythms so they stay distinct.
Morse Code for 6 — FAQ
What is the Morse code for 6?
The Morse code for “6” is −····. That uses 6.
How do you tap or flash 6 in Morse?
Match −····: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.
How long does 6 take to send?
At 18 WPM, “6” takes about 800 ms. At 12 WPM the same −···· pattern is slower but the dit/dah ratios stay identical.
Related Morse lookups
Other high-intent translations — each page has its own Morse, timing, and breakdown.