100% private · runs in your browser
Morse Code for 7
The digit 7 is −−···. 7 is two dahs and three dits, continuing the 6–0 family that leads with dahs.
−−···
Text
Morse code
--...
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
1 chars1 words3 · / 2 −
Letter-by-letter Morse for 7
Digits use five Morse elements. 7 is −−··· (dahdahditditdit).
−−···
About Morse for the digit 7
7 sits next to 6 (−····) and 8 (−−−··).
Sending 7 at 18 WPM takes about 933 ms (dahdahditditdit).
- Morse
- −−···
- Dots / dashes
- 3 · / 2 −
- Characters
- 1
- At 18 WPM
- 933 ms
How to tap 7
- The pattern is −−··· (dahdahditditdit). A dit is a short tap or flash; a dah is about three times longer.
- 7 is a single character, so you only need the tiny gap between its own dits and dahs.
- At 18 WPM this takes about 933 ms. Slow down to 12 WPM if you are still learning the rhythm.
- Press Play to hear 7, or turn on the lamp and match the flashes.
Morse Code for 7 — FAQ
What is the Morse code for 7?
The Morse code for “7” is −−···. That uses 7.
How do you tap or flash 7 in Morse?
Match −−···: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.
How long does 7 take to send?
At 18 WPM, “7” takes about 933 ms. At 12 WPM the same −−··· pattern is slower but the dit/dah ratios stay identical.
Related Morse lookups
Other high-intent translations — each page has its own Morse, timing, and breakdown.