100% private · runs in your browser
Morse Code for 9
The digit 9 is −−−−·. 9 is four dahs and a dit, one dah short of 0.
−−−−·
Text
Morse code
----.
lamp
Try:
Speed18 WPM
Pitch600 Hz
Volume60%
1 chars1 words1 · / 4 −
Letter-by-letter Morse for 9
Digits use five Morse elements. 9 is −−−−· (dahdahdahdahdit).
−−−−·
About Morse for the digit 9
9 sits next to 8 (−−−··) and 0 (−−−−−).
Sending 9 at 18 WPM takes about 1.2 seconds (dahdahdahdahdit).
- Morse
- −−−−·
- Dots / dashes
- 1 · / 4 −
- Characters
- 1
- At 18 WPM
- 1.2 seconds
How to tap 9
- The pattern is −−−−· (dahdahdahdahdit). A dit is a short tap or flash; a dah is about three times longer.
- 9 is a single character, so you only need the tiny gap between its own dits and dahs.
- At 18 WPM this takes about 1.2 seconds. Slow down to 12 WPM if you are still learning the rhythm.
- Press Play to hear 9, or turn on the lamp and match the flashes.
Morse Code for 9 — FAQ
What is the Morse code for 9?
The Morse code for “9” is −−−−·. That uses 9.
How do you tap or flash 9 in Morse?
Match −−−−·: short for each dit, about three times as long for each dah. Press Play on this page, then copy the same timing with a tap, whistle, or flashlight.
How long does 9 take to send?
At 18 WPM, “9” takes about 1.2 seconds. At 12 WPM the same −−−−· pattern is slower but the dit/dah ratios stay identical.
Related Morse lookups
Other high-intent translations — each page has its own Morse, timing, and breakdown.